Alex's Cyberdeck

A rugged Raspberry Pi 5 computer in a waterproof case: 10" touchscreen in the lid, keyboard with touchpad in the base, and a Meshtastic LoRa radio for off-grid texting with Bill's deck. No 3D printing or cutting needed.

11 parts≈ $499.22
Case$49.00
16" waterproof hard case, pick-and-pluck foam
15 × 11 × 4.7 in interior. Pluck the foam to fit each part.
View on Amazon →
Screen$104.99
10.1" 1920×1200 touchscreen for Raspberry Pi
HDMI + USB-C. Goes in the lid foam.
View on Amazon →
Computer$130.00
Raspberry Pi 5 (4GB)
The brain.
View on Amazon →
Cooling$9.99
Raspberry Pi Active Cooler
Needed. The Pi 5 throttles without it.
View on Amazon →
Storage$23.95
SanDisk 64GB microSD
Flash Raspberry Pi OS onto it.
View on Amazon →
Keyboard$49.99
Perixx PERIBOARD-510H (built-in touchpad)
9 × 6.3 in, wired USB. Fits the base.
View on Amazon →
Battery$69.99
Anker 20,000mAh power bank, 87W
Runs the Pi and the screen together.
View on Amazon →
Wall power$12.34
RasTech 27W Pi 5 power supply
For desk use / charging.
View on Amazon →
Video cable$6.99
UGREEN micro-HDMI to HDMI, 3 ft
Pi to screen.
View on Amazon →
Radio$29.99
Heltec LoRa 32 V4 (Meshtastic)
Plugs into the Pi over USB-C. Off-grid texting.
View on Amazon →
Antenna$11.99
915 MHz 3 dBi antenna + panel cable, 2-pack
U.FL-to-SMA cable to a jack in the case wall; antenna screws on outside.
View on Amazon →

Assembly (about an afternoon)

  1. Flash Raspberry Pi OS onto the microSD and boot the Pi with the cooler attached.
  2. Pluck the lid foam to hold the screen; pluck the base foam for the keyboard, Pi, battery and radio.
  3. Velcro the Pi, battery and Heltec in place. Run micro-HDMI and USB-C from the Pi to the screen.
  4. Drill one 6.5 mm hole in the case wall for the antenna jack, or just screw the antenna on when the case is open.
  5. Install the Meshtastic web app or client on the Pi and pair the Heltec on the same private channel as Bill's.

⚠️ Never power the Heltec radio without the antenna attached. Transmitting without one can damage it.

Easier "kit" option

The Raspberry Pi 500 Desktop Kit ($240, Adafruit) is a Pi 5 built into a keyboard. It replaces the Pi, cooler, microSD, power supply and keyboard, but has no touchpad (use the touchscreen or a mouse).

Range tips